METALVANTARequest a Quote
Products/Zinc-Plated Wedge Anchors

Concrete Anchoring

Zinc-Plated Wedge Anchors

Zinc-plated carbon steel wedge anchors for fastening steel fixtures to concrete. Tightening the nut draws the tapered stud into the expansion clip, expanding it against the wall of the drilled hole.

MaterialCarbon Steel
Property Class4.8
FinishZinc Plated

Dimensions & Configuration

Wedge anchor side view with nominal thread diameter d, overall length L, flange nut, flat washer, expansion clip and tapered end Flange nutFlat washer Expansion clipTapered end dL
Configuration reference · Not to scale
Thread Diameter · d
M8–M20
Nominal Overall Length · L
75–170 mm, depending on thread size
Anchor Stud
Carbon steel · Property class 4.8
Surface Finish
Zinc plated
Included Hardware
Hex flange nut and separate flat washer

Technical Specifications

Wedge Anchor Sizes

Choose from 10 sizes across six metric thread diameters. Sizes are specified as thread size × nominal anchor length.

Thread SizeNominal Anchor Length (mm)
M875
M1090
M12100 · 120
M14100 · 120 · 140
M16120 · 140
M20170

Typical Wedge Anchor Applications

Wedge anchors fasten steel fixtures to existing solid concrete. Tightening the nut expands the clip against the drilled hole.

Equipment and Mounting Plates

Common examples include equipment brackets, machine mounting plates and support frames fixed to a concrete slab.

Framing and Service Supports

Use cases include steel angles, channel framing and pipe-support brackets fixed to concrete walls or floors, subject to the project’s load and substrate requirements.

How to Install a Wedge Anchor

Follow the verified installation instructions for the selected anchor size and concrete condition.

Installation Sequence

  1. Drill. Use the specified hole diameter and depth.
  2. Clean. Remove drilling dust and debris as directed.
  3. Insert. Seat the anchor to the specified embedment with the supplied flange nut and flat washer in place.
  4. Tighten. Use a calibrated torque wrench and apply the specified installation torque for that size.

Checks Before Installation

  • Verify concrete condition and thickness, fixture thickness, anchor spacing and edge distance against the project design.
  • Confirm the required embedment, torque and load data for the exact size. The blue marking shown in the product image is a visual reference.
  • For cracked concrete, seismic loading or other approval-dependent applications, verify that the exact anchor has the required documentation.

HAVE A DRAWING?

Request a Quote for Wedge Anchors

Send us your size and quantity list along with any project specifications.