DRAWING-LED FASTENERS
L-Shaped Anchor Bolts
Bent foundation anchors for steel columns, equipment bases and power structures, formed to the specified embedment geometry.
SPECIFICATIONS & CUSTOMIZATION
Define The Geometry.
Specify the length reference, bend geometry and exposed thread on the same drawing.
Dimensions & Configuration
- Rod Diameter · d
- M12–M64; other diameters to drawing
- Overall Height · L
- 300–3000 mm; overall height to the outside of the foot
- Foot Length · A
- Overall foot projection; inside / centreline alternatives must be identified
- Thread Length · b
- Thread length, pitch and tolerance
- Inside Bend Radius · R
- Inside surface radius of the bend
- Bend Angle · α
- 90° for the illustrated L form; other angles to drawing
Material & Grade
Q235 / Q345 carbon steel; classes 4.8 / 6.8 / 8.8 as specified. Match the material, forming process and mechanical requirements.
Drawing & Bend Reference
Specify whether dimensions are overall, inside or centreline values. Include bend radius and dimensional tolerances.
Surface Finish
Plain / black finish or hot-dip galvanizing. Define coated areas, coating requirements and the mating nut fit.
COMPONENTS & INSPECTION
Specify The Anchor And Its Hardware.
Matched Hardware
Define the assembly required above and below the base plate.
- Nuts and washers by type, grade and quantity
- Plate washers or other drawing-specific accessories
- Marking and packing by item or installation position
Dimensional Inspection
Agree inspection dimensions using the same reference convention as the drawing.
- Rod diameter, overall height and leg length
- Bend angle, inside radius and thread length
- Material, mechanical and coating requirements
HAVE A DRAWING?
Send Your Foundation Anchor Detail.
Include diameter, height, leg length, bend radius, thread length, material / grade, quantity and finish.
