DRAWING-LED FASTENERS
U-Bolts
Formed mounting fasteners for pipe supports, solar mounting and structural brackets, matched to the section being secured.
SPECIFICATIONS & CUSTOMIZATION
Define The Geometry.
Use inside clear dimensions to define the fit around the pipe or support section.
Dimensions & Configuration
- Rod Diameter · d
- Metric rod diameter and material to the mounting requirement
- Inside Width · W
- Clear distance between the inner faces of both legs
- Inside Height · H
- Clear height from the inner bend to the specified leg end reference
- Threaded Length · b
- Thread length on each leg, pitch and tolerance
- Bend Form & Radius
- Round / square bend; inside radius to drawing
- Mating Section
- Provide the pipe outside diameter or support-section dimensions
Material Options
Carbon steel or 304 / 316L stainless steel, selected to the installation environment and mechanical requirements.
Fit & Geometry
Define inside width, inside height, bend radius and thread lengths. Round and square bends require their own dimensioned drawings.
Surface Finish
Plain or hot-dip galvanized carbon steel; stainless steel finish to the specified requirement. Account for coating in the required fit.
COMPONENTS & INSPECTION
Match The U-Bolt To The Installation.
Mounting Components
Specify the hardware needed to clamp the actual pipe or support section.
- Two threaded legs with specified nuts and washers
- Backing plates or brackets where included in the order
- Pipe outside diameter or support-section detail
Fit & Thread Inspection
Agree the fit requirements before production.
- Inside width, height, bend form and leg alignment
- Thread pitch, length and mating nut fit
- Material, finish and coating requirements
HAVE A DRAWING?
Have A Pipe Or Mounting Detail?
Send the inside dimensions or mating section drawing, material, finish, hardware quantities and delivery requirements.
